Thermal and Energy Geotechnics

Publications

For full detail, please see GoogleScholar, ResearchGate, ORCiD

  1. Yilmaz, M., Eun, J., Tinjum, J.M., and Fratta, D. 2022. “In-service Response of Shallow On-shore Wind Turbine Generator Foundation.” Geotechnical and Geological Engineering. 40(2), 977–994.
  2. Eun, J., Mousavi, M.S., Rhoades, K., Tinjum, J.M. 2022. “Unsaturated Characteristics and Transport of Hydrated Chromium Ore Processing Residue.” Environmental Geotechnics. 40, 1–15.
  3. Yilmaz, M., Tinjum, J.M., Acker, C., and Marten, B. 2021. “Transport Mechanisms and Emission of Landfill Gas through Various Configurations in an MSW Landfill Using a Static Flux Chamber Technique. Journal of Engineering Management. 280, 111677.
  4. Yilmaz, M., Eun, J., Tinjum, J.M., and Fratta, D. 2021. “In-service Response of Shallow On-shore Wind Turbine Generator Foundation.” Geotechnical and Geological Engineering. 1–18.
  5. Chen, J., Eun, J., Feng, Y., and Tinjum, J.M. 2021. “Long-term Leaching Behavior of Chromite Ore Processing Residue as Backfill Material and the Propagation of Chromium in the Surrounding Soil.” Journal of Hazardous, Toxic, and Radioactive Waste. 25(3), 04021017.
  6. Oh, H. and Tinjum, J.M. 2020. “Effect of Initial Moisture Content on Critical Temperature of Three Sandy Soils.” Proceedings of ASCE Geo-Congress. ASCE Geotechnical Special Publication 316. 21–
  7. Thomas, L.K., Tinjum, J.M., and Holcomb, F.H. 2020. “Environmental Life Cycle Assessment of a Deep Direct-Use Geothermal System in Champaign, Illinois.” Proceedings, 45th Workshop on Geothermal Reservoir Engineering. Stanford University, Stanford, California, February 10-12, 2020, SGP-TR-216.
  8. Mostafa Afzalian, Jongwan Eun, James M Tinjum. 2019. “Evaluation of Bimodal Water Retention Characteristics for Hydrating Chromium Ore Processing Residue (COPR).” Geo-Congress 2019: Geotechnical Materials, Modeling, and Testing. 754-764.
  9. Alsabhan, A.H., Fratta, D., Warren, B., Tinjum, J.M., and Edil, T.B. 2019. “Using Time Domain Reflectometry to Determine Depth of Fouling and Fouling Type in Railway Track Substructure.” ASTM Geotechnical Testing Journal. 42(1), 156– DOI: 10.1520/GTJ20170305.
  10. McDaniel, A., Tinjum, J.M., Lin, Y-F., Stumpf, A.J., Thomas, L., and Hart, D.J. 2018. “Distributed Thermal Response Test to Analyze Thermal Properties in Heterogeneous Lithology.” Geothermics. 76, 116–124.
  11. Stumpf, A., Damico, J., Okwen, R., Stark, T., Elrick, S., Nelson, W.J, Lu, Y., Holcomb, F., Tinjum, J., Yang, F., Frailey, S., and Lin, Y-F. “Feasibility of a Deep Direct-Use Geothermal System at the University of Illinois Urbana-Champaign.” GRC Transactions. 42.
  12. Alsabhan, A.H., Fratta, D., Warren, B., Tinjum, J.M., and Edil, T.B. 2018. “Using Time Domain Reflectometry to Determine Depth of Fouling and Fouling Type in Railway Track Substructure.” ASTM Geotechnical Testing Journal. 42(1).
  13. McDaniel, A., Tinjum, J.M., Hart, D.J., and Fratta, D. 2018. “Dynamic Calibration for Permanent Distributed Temperature Sensing Networks.” IEEE Sensors Journal. 18(6), 2342– DOI: 10.1109/JSEN.2018.2795240.
  14. Alsabhan, A.H., Tinjum, J.M., Fratta, D., and Edil, T.B. 2018. “Field Validation of Polyurethane Technology in Remediating Rail Substructure and Enhancing Rail Freight Capacity.” In: Railroad Ballast Testing and Properties. DOI 10.1520/STP160520170142.
  15. Eun, J, Tinjum, J.M., Benson, C.H., and Edil, T.B. 2018. “Methane Transport through Simulated Interim Landfill Covers with a PE Geofilm or Ethylene-Vinyl Alcohol, LLDPE, or PVC Geomembrane.” ASCE Journal of Environmental Engineering. 144(2). DOI: 10.1061/(ASCE)EE.1943-7870.0001298.
  16. Eun, J, Tinjum, J.M., Benson, C.H., and Edil, T.B. 2018. “Equivalent Transport Parameters for Volatile Organic Compounds (VOCs) in Co-Extruded Geomembrane Containing Ethylene-Vinyl Alcohol (EVOH).” Journal of Geotechnical and Geoenvironmental Engineering. 144(7).
  17. McDaniel, A., Fratta, D., Tinjum, J.M., and Hart, D.J. 2018. “Long-term District-Scale Geothermal Exchange Borefield Monitoring with Fiber Optic Distributed Temperature Sensing.” Geothermics. 72, 193– DOI: 10.1016/j.geothermics.2017.11.008.
  18. Enos, C., Yilmaz, M., Wu, Z., Tinjum, J.M., and Fratta, D. 2018. “Field and Lab Characterization of the Operational Response of Wind Turbine Generator Foundation Soil.” International Foundations Congress and Equipment Expo. IFCEE 243–
  19. Herrera, C., Nellis, G., Reindl, D.T., Klein, S., Tinjum, J.M., and McDaniel, A. 2017. “Use of a Fiber Optic Distributed Temperature Sensing System for Thermal Response Testing of Ground-coupled Heat Exchangers.” Geothermics. 71, 331– DOI: 10.1016/j.geothermics. 2017.10.002.
  20. Mandal, T., Tinjum, J., and Edil, T. 2017. “Study on Flexural Strength, Modulus, and Fatigue Cracking of Cementitiously Stabilized Materials.” Road Materials and Pavement Design. DOI: 1080/14680629.2017.1325772.
  21. Florea, L.J., Hart, D., Tinjum, J., and Choi, C. 2017. “Potential Impacts to Groundwater from Ground-Coupled Geothermal Heat Pumps in District Scale.” Groundwater. 55(1). 8–
  22. Ozdogan-Dolcek, A., Atkins, I., Harper, M.K., Tinjum, J.M., and Choi, C.Y. 2017. “Performance and Sustainability of District-Scale Ground Coupled Heat Pump Systems.” Geotechnical and Geological Engineering. DOI 10.1007/s10706-016-0147-y.
  23. Tian, K., Benson, C.H., and Tinjum, J.M. 2017. “Chemical Characteristics of Leachate in Low-Level Radioactive Waste Disposal Facilities.” Journal of Hazardous, Toxic, and Radioactive Waste. 21(4). DOI: 10.1061/(ASCE)HZ.2153-5515.0000361.
  24. Eun, J, Tinjum, J.M., Benson, C.H., and Edil, T.B. 2017. “Comparison of Volatile Organic Compound Transport in Composite Liners with HDPE and Ethylene–Vinyl Alcohol Coextruded Geomembranes.” ASCE Journal of Geotechnical and Geoenvironmental Engineering. 143(6). DOI: 10.1061/(ASCE)GT.1943-5606.0001484.
  25. Tian, K., Benson, C.H., Tinjum, J.M., and Edil, T.B. 2017. “Antioxidant Depletion and Service Life Prediction for HDPE Geomembranes Exposed to Low-Level Radioactive Waste Leachate.” ASCE Journal of Geotechnical and Geoenvironmental Engineering. DOI 1061/(ASCE)GT.1943-5606.0001643.
  26. Oh, H. and Tinjum, J.M. 2017. “Comparison of Two Laboratory Methods for Measuring the Critical Temperature of Sandy Soils.” Proceedings of ASCE Geotechnical Frontiers 2017. ASCE Geotechnical Special Publication 280. 809–
  27. Mandal, T., Tinjum, J.M., Gokce, A., and Edil, T.B. 2016. “Protocol for Testing Flexural Strength, Flexural Modulus, and Fatigue Failure of Cementitiously Stabilized Materials Using Third-Point Flexural Beam Tests. ASTM Geotechnical Testing Journal. 39(1). 1–15.
  28. Mandal, T., Tinjum, J.M., and Edil, T.B. 2016. “Non-Destructive Testing of Cementitiously Stabilized Materials using Ultrasonic Pulse Velocity Test.” Transportation Geotechnics. 6(2016). 97–107.
  29. Rhoades, K., Tinjum, J., and Eun, J. 2016. “Transport of Hexavalent Chromium in the Vadose Zone by Capillary and Evaporative Transport from Chromium Ore Processing Residue.” Canadian Geotechnical Journal. 53(4). 619– DOI: 10.1139/cgj-2015-0010.
  30. Bloom, E. and Tinjum, J.M. 2016. “Fully Instrumented Life-Cycle Analyses for Residential Geo-Exchange System.” Proceedings of ASCE Geo-Chicago. ASCE Geotechnical Special Publication 270. 114–
  31. McDaniel, A., Harper, M., Fratta, D., Tinjum, J.M., Choi, C., and Hart, D. 2016. “Dynamic Calibration of a Fiber-Optic Distributed Temperature Sensing Network at a District-Scale Geothermal Exchange Borefield.” Proceedings of ASCE Geo-Chicago. ASCE Geotechnical Special Publication 270. 1–
  32. Eun, J., Yilmaz, M., Tinjum, J.M., and Benson, C.H. 2016. “Hydrogen Sulfide (H2S) Transport through Simulated Interim Covers with Conventional and Co-Extruded Ethylene-Vinyl Alcohol (EVOH) Geomembranes.” Proceedings of ASCE Geo-Chicago. ASCE Geotechnical Special Publication 271. 411–
  33. Eun, J., Chen, J., and Tinjum, J.M. 2016. “Long-Term Leaching Characteristics of Chromite Ore Processing Residue Using Synthetic Groundwater.” Proceedings of ASCE Geo-Chicago. ASCE Geotechnical Special Publication 270. 1–
  34. Walker, M., Meyer, L., Tinjum, J.M., Hart, D. 2015. “Thermal Property Measurements of Stratigraphic Units with Modeled Implications for Performance of Vertical Ground Source Heat Pumps.” Geotechnical and Geological Engineering. DOI 10.1007/s/10706-015-9847-y.
  35. Yilmaz, M., Eun, J., Tinjum, J.M., and Fratta, D. 2015. “In-Service Behavior of Soil Underlying Shallow Wind Turbine Generator Foundation.” Proceedings of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, 1965–1972. Buenos Aires, Argentina. IOS Press BV. ISBN 978-1-61499-602-6.
  36. Ebrahimi, A., Tinjum, J.M., and Edil, T.B. 2015. “Deformational Behavior of Fouled Railway Ballast.” Canadian Geotechnical Journal. 52(2015). 344–355.
  37. Soleimanbeigi, A., Shedivy, R.F., Tinjum, J.M., and Edil T.B. 2015. “Climatic Effect on Resilient Modulus of Recycled Unbound Aggregates.” Road Materials and Pavement Design. 16(4). 836–853.
  38. Ba, M., Tinjum, J.M., and Fall, M. 2015. “Prediction of Permanent Deformation Model Parameters of Unbound Base Course Aggregates Under Repeated Loading.” Road Materials and Pavement Design. 16(4). 1–16.
  39. Diagne, M., Tinjum, J.M., and Nokkaew, N. 2015. “The Effects of Recycled Clay Brick Content on the Engineering Properties, Weathering Durability, and Resilient Modulus of Recycled Concrete Aggregate.” Transportation Geotechnics. 3(2015). 15–23.
  40. Hesse, D.E., Tinjum, J.M., and Warren, B.J. 2014. “Impact of Increasing Freight Loads on Rail Substructure from Fracking Sand Transport.” Transportation Geotechnics. 1(4). 241–256.
  41. Nokkaew, K., Tinjum, J.M., Likos, W.J., and Edil, T.B. 2014. “Effect of Matric Suction on Resilient Modulus for Compacted Recycled Asphalt Base Course in Postcompaction State.” Transportation Research Record, Journal of the Transportation Research Board. 2433. 241–256. DOI 10.3141/2433-08.
  42. Wu, R., Tinjum, J.M., and Likos, W. 2014. “Finite-Element Modeling of Coupled Heat and Moisture Transfer in Unsaturated Soils for Shallow Horizontal Geothermal Ground Loops.” Geotechnical and Geological Engineering. DOI 10.1007/s10706-014-9811-2.
  43. Yao, J., Oh, H., Likos, W., and Tinjum, J.M. 2014. “Three Laboratory Methods for Measuring Thermal Resistivity Dryout Curves of Coarse-Grained Soils.” ASTM Geotechnical Testing Journal. 37(6), 1056–1067.
  44. Keene, A., Tinjum, J.M., and Edil, T.B. “Mechanical Properties of Polyurethane-Stabilized Ballast and Infrastructure Materials.” Geotechnical Engineering Journal of the SEAGS and AGSSEA. 45(1). 67–73.
  45. Ebrahimi, A., Tinjum, J.M., and Edil, T.B. 2014. “Mechanistic-Based Maintenance Planning of Railway Substructure.” Geotechnical Engineering Journal of the SEAGS and AGSSEA. 45(1). 48–55.
  46. Eun, J., Tinjum, J.M., Benson, C.H., and Edil, T.B. “Volatile Organic Compound (VOC) Transport through Composite Liner with Co-Extruded Geomembrane Containing Ethylene Vinyl-Alcohol (EVOH).” ASCE Geo-Congress 2014.
  47. Hunter, E.L., Tinjum, J.M., and Benson, C.H. “Radionuclide Behavior in Low-Level Radioactive Waste (LLW) Disposal Barrier Materials: Impacts of Sorption.” ASCE Geo-Congress 2014.
  48. Oh, H., Yao, J., Tinjum, J.M., and Likos, W.J. 2014. “Thermal Resistivity Dryout Curves for Three Sandy Soils.” ASCE Geo-Congress 2014.
  49. Ozdogan-Dolcek, A., Tinjum, J.M., and Hart, D. 2014. “Numerical Modeling of Ground Temperature Response in a Ground Source Heat Pump System (GSHP).” Geotechnical Special Publication No. 234, Proceedings Geo-Congress 2014. 2755–2766.
  50. Rajaei, M., and Tinjum, J.M. “Case Study of Wind Plant Life Cycle Energy, Emissions, and Water Footprint.” ASCE Geo-Congress 2014.
  51. Tian, K., Tinjum, J.M., Benson, C.H., and Edil, T.B. 2014. “Antioxidant Depletion in HDPE Geomembranes Exposed to Low-Level Radioactive Waste Leachate.” ASCE Geo-Congress 2014.
  52. Wu, R., Tinjum, J.M., and Likos, W. 2014. “Coupling Thermal Conductivity Dryout Curves with Unsaturated Modeling of Shallow Horizontal Geothermal Exchange Loops.” Geotechnical Special Publication No. 234, Proceedings Geo-Congress 2014. 4015–4026.
  53. Yilmaz, M., Schubert, S., Tinjum, J.M., and Fratta, D. “Foundation Soil Response to Wind Turbine Generator Loading.” ASCE Geo-Congress 2014.
  54. Woodward, N.R., Tinjum, J.M., and Wu, R. 2013. “Water Migration Impacts on Thermal Resistivity Testing.” ASTM Geotechnical Testing Journal. 36(3). 948–955.
  55. Rajaei, M., and Tinjum, J.M. 2013. “Life Cycle Assessment of Energy Balance and Emissions of a Wind Energy Plant.” Journal of Geotechnical and Geological Engineering. 31(6). 1663–1670.
  56. Ba, M., Fall, M., Tinjum, J.M., and Nokkaew, K. 2013. “Effect of Soil Suction on Resilient Modulus of Compacted Aggregate Base Courses.” Journal of Geotechnical and Geological Engineering. 31(5). 1497–1510.
  57. Chen, J., Tinjum, J.M., and Edil, T.B. 2013. “Leaching of Alkaline Substances and Heavy Metals from Recycled Concrete Aggregate Used as Unbound Base Course.” Transportation Research Record, Journal of the Transportation Research Board.
  58. Soleimanbeigi, A., Edil, T.B. and Tinjum, J.M. 2013. “Effect of Temperature on Shear Strength of Recycled Asphalt Shingles.” Transportation Research Record, Journal of the Transportation Research Board.
  59. Lee, J., Edil, T.B., Benson, C.H., and Tinjum, J.M. 2013. “Building Environmentally and Economically Sustainable Transportation Infrastructure-Highways: A Green Highway Rating System.” ASCE Journal of Construction Engineering and Management.
  60. Keene, A., Edil, T.B., Fratta, D., and Tinjum, J.M. 2013. “Modeling Effect of Polyurethane Stabilization on Track Response.” ASCE Geotechnical Special Publication No. 231, Proceedings Geo-Congress 2013. 1410–1418.
  61. Bozyurt, O., Keene, A.K., Tinjum, J.M., Edil, T.B., and Fratta, D. 2013. “Freeze-thaw Effects on Stiffness of Unbound Recycled Base Course.” ASTM International Symposium on Mechanical Properties of Frozen Soils, STP1568. Jacksonville, FL.
  62. Boecher, T.A., Tinjum, J.M., and Xu, H. 2012. “Mineralogical and Amorphous Species in Chromium Ore Processing Residue.” Journal of Residuals Science and Technology. 9(4). 131–141.
  63. Ebrahimi, A., Tinjum, J.M., and Edil, T.B. 2012. “Protocol for Testing Fouled Railway Ballast in Large-Scale Cyclic Triaxial Equipment.” ASTM Geotechnical Testing Journal. 35(5). 796–804.
  64. Tinjum, J.M., and Lang, P. 2012. “Wind Geotechnics.” ASCE Geo-Strata. 16(1). 18–26.
  65. Bozyurt, O., Tinjum, J.M., Son, Y.H., Edil, T.B., and Benson, C.H. 2012. “Resilient Modulus of Recycled Asphalt Pavement and Recycled Concrete Aggregate.” ASCE Geotechnical Special Publication No. 225, Proceedings Geo-Congress 2012. 3901–3910.
  66. Nokkaew, K., Tinjum, J.M., and Benson, C.H. 2012. “Hydraulic Properties of Recycled Asphalt Pavement and Recycled Concrete Aggregate.” ASCE Geotechnical Special Publication No. 225, Proceedings Geo-Congress 2012. 1476–1485.
  67. Chen, J., Bradshaw, S., Benson, C.H., Tinjum, J.M., and Edil, T.B. 2012. “pH-dependent Leaching of Trace Elements from Recycled Concrete Aggregate.” ASCE Geotechnical Special Publication No. 225, Proceedings Geo-Congress 2012. 3729–3737.
  68. Woodward, N.R., and Tinjum, J.M. 2012. “Impact of Moisture Migration on Thermal Resistivity Testing in Unsaturated Soil.” ASCE Geotechnical Special Publication No. 225, Proceedings Geo-Congress 2012. 4426–4435.
  69. Leaching of Trace Elements from Recycled Concrete Aggregate.” ASCE Geotechnical Special Publication No. 225, Proceedings Geo-Congress 2012. 3729–3737.
  70. Bozyurt, O., Tinjum, J.M., Son, Y.H., Edil, T.B., and Benson, C.H. 2012. “Resilient Modulus of Recycled Asphalt Pavement and Recycled Concrete Aggregate.” ASCE Geotechnical Special Publication No. 225, Proceedings Geo-Congress 2012. 3901–3910.
  71. Eun, J., and Tinjum, J.M. 2012. “Unsaturated Transport of Ebullition Gas through Sediment Capping Geotextiles and Sand.” 5th Asia-Pacific Conference on Unsaturated Soils. 481–486.
  72. Eun, J., and Tinjum, J.M. 2012. “Variation in Air Entry Suction of Nonwoven Geotextiles with Pore Size Distribution.” 5th Asia-Pacific Conference on Unsaturated Soils. 475–480.
  73. Lee, J.C., Edil, T.B., Benson, C.H., and Tinjum, J.M. 2011. “Evaluation of Variables Affecting Sustainable Highway Design with BE2ST-in-Highways System.” Transportation Research Record, Journal of the Transportation Research Board. 2233. 178–186.
  74. , Scalia, J., Schlicht, P., and Wang, X. 2011. “Engineered Covers for Waste Containment: Changes in Engineering Properties & Implications for Long-Term Performance Assessment.” NUREG/CR-7028, Office of Research, U.S. Nuclear Regulatory Commission, Washington, DC.
  75. Lee, J.C., Edil, T.B., Tinjum, J.M., and Benson, C.H. 2010. “Quantitative Assessment of Environmental and Economic Benefits of Using Recycled Construction Materials in Highway Construction.” Transportation Research Record, Journal of the Transportation Research Board. 2158. 138–142.
  76. Millspaugh, A.M., Tinjum, J.M., and Boecher, T.A. 2010. “Specific Gravity of Expansive Chromium Ore Processing Residue with Complex Microstructure.” ASTM Geotechnical Testing Journal. 33(4). 322–328.
  77. Schlicht, P., Benson, C., Tinjum, J.M., and Albright, W. 2010. “In-Service Hydraulic Properties of Two Landfill Final Covers in Northern California.” ASCE Geotechnical Special Publication No. 199, Proceedings Geo-Congress 2010. 2867–2877.
  78. Dixon, N., Langer, U., Reddy, K., Maugeri, M., Tinjum, J., Mahler, C., and Cho, Y. 2009. “Waste Characterization.” ASCE Geotechnical Special Publication No. 209. Proceedings of the 2008 International Symposium on Waste Mechanics. 135–152.
  79. Tinjum, J.M., Benson, C.H., and Edil, T.B. 2008. “Mobilization of Cr(VI) from Chromite Ore Processing Residue through Acid Treatment.” Science of the Total Environment. 391(1). 13–25.
  80. Tinjum, J.M., Benson, C.H., and Edil, T.B. 2008. “Treatment of Cr(VI) in Chromium Ore Processing Residue Using Ferrous Sulfate-Sulfuric Acid or Cationic Polysulfides.” ASCE Journal of Geotechnical & Geoenvironmental Engineering. 132(12). 1791–1803.
  81. Schlicht, P.D., Benson, C.H., Tinjum, J.M., and Albright, W.H. 2010. “In-Service Hydraulic Properties of Two Landfill Final Covers in Northern California.” ASCE Geotechnical Special Publication No. 199, Proceedings Geo-Congress 2010. 2867–2877.
  82. Tinjum, J.M., Houck, C.J., and French, C. 2008. “Field Investigation Techniques for Characterizing and Delineating COPR.” ASCE Geotechnical Special Publication No. 178, Proceedings Geo-Congress 2008. 407–414.
  83. Dixon, N., Langer, U., Reddy, K., Maugeri, M., Tinjum, J.M., Mahler, C., and Cho, Y. 2009. “Waste Characterization.” ASCE Geotechnical Special Publication No. 209. Proceedings of the 2008 International Symposium on Waste Mechanics. 135–152.
  84. Tinjum, J.M., Benson, C.H., Edil, T.B., and Chowdhury, A. 2005. “An Innovative Method to Treat Chromium Ore Processing Residue.” 8th International In Situ and On-Site Bioremediation Symposium, Baltimore, MD.
  85. Tinjum, J.M., Krantz, B.J., Ditto, W.L., and Aldern, J.L. 2003. “Investigation and Remediation of Karst Features at Foundry Landfill Site.” Sinkholes and the Engineering and Environmental Impacts of Karst: Proceedings of the 9th Multidisciplinary Conference. ASCE Geotechnical Special Publication No. 122. 349–360.
  86. Tinjum, J.M., and Schittone, J.V. 2001. “Landfill Construction through Peat and Organic Silt.” Soft Ground Technology. ASCE Geotechnical Special Publication No. 112. 388–398.
  87. Tinjum, J.M., Benson, C.H., and Blotz, L.R. 1997. “Soil Water Characteristic Curves for Compacted Clays.” ASCE Journal of Geotechnical & Geoenvironmental Engineering. 123(11). 1060–1069.
  88. Benson, C.H., Tinjum, J.M., and Hussin, C.J. 1995. “Leakage Rates from Geomembrane Liners Containing Holes.” Geosynthetics ’95 Conference Proceedings. 745–758.
  89. Tinjum, J.M. 2017. “Energy Geotechnics: Towards a Sustainable Energy Future.” In: Geoenvironmental Practices and Sustainability: Linkages and Directions.
  90. Tinjum, J.M., and Christensen, R.W. 2010. “Site Characterisation, Design, and Construction Considerations.” In Wind Energy Systems: Optimising Design and Construction for Safe and Reliable Operation. 28–45. Eds. J.D. Sørensen and J.N. Sørensen. Woodhead Pub. Cambridge, UK.
  91. Ba, M., Fall, M., and Tinjum, J.M. 2015. Comparison of Laboratory Resilient Modulus with Elastic Moduli Measured with Soil Stiffness Gauge and Back-Calculated from Large Scale Model Experiment of Unbound Base Course. International Conference on Innovations in Construction. May 11–12, Paris.
  92. Mandal, T., Tinjum, J.M., and Edil, T.B. “Non-Destructive Testing of Cementitiously Stabilized Materials Using Ultrasonic Pulse Velocity Test.” Transportation Research Record, Journal of the Transportation Research Board. Washington, D.C. Role: Presented (poster) by Tinjum.
  93. Bozyurt, O., Keene, A.K., Tinjum, J.M., Edil, T.B., and Fratta, D. 2013. “Freeze-thaw Effects on Stiffness of Unbound Recycled Base Course.” ASTM International Symposium on Mechanical Properties of Frozen Soils, STP1568. Jacksonville, FL.
  94. Eun, J., and Tinjum, J.M. 2012. “Unsaturated Transport of Ebullition Gas through Sediment Capping Geotextiles and Sand.” 5th Asia-Pacific Conference on Unsaturated Soils. 481–486.
  95. Eun, J., and Tinjum, J.M. 2012. “Variation in Air Entry Suction of Nonwoven Geotextiles with Pore Size Distribution.” 5th Asia-Pacific Conference on Unsaturated Soils. 475–480.
  96. Rajaei, M. and Tinjum, J.M. 2012. “Life Cycle Assessment of Energy Balance and Emissions of a Wind Energy Plant.” 17th Annual Great Lakes Geotechnical/Geoenvironmental Conference. Cleveland, OH.
  97. Ebrahimi, A., Fratta, D., and Tinjum, J.M. 2010. “Detection of Fouling in Ballast by Electromagnetic Surveying.” AREMA 2010 Annual Conference & Exposition. Orlando, FL.
  98. Ebrahimi, A., Tinjum, J.M., and Edil, T.B. 2010. “Large-scale, Cyclic Triaxial Testing of Rail Ballast.” AREMA 2010 Annual Conference & Exposition. Orlando, FL.
  99. “Use of BE2ST in-Highways for Green Highway Construction Rating in Wisconsin.” Proceedings of 1st T&DI Green Streets & Highway Conference. 480–494.
  100. Keene, A.K., Edil, T.B., Tinjum, J.M., and Brown, B.W. 2012. “Mechanical Properties of Polyurethane-stabilized Ballast.” International Symposium on Geotechnical Engineering for High-speed Transportation Infrastructure. Hangzhou, China.
  101. Keene, A.K., Edil, T.B., Tinjum, J.M., and Brown, B.W., 2012. “Engineering Design of Polyurethane-stabilized Ballast.” 3rd International Conference. on New Developments in Soil Mechanics and Geotechnical Engineering. Near East Univ., Nicosia, Cyprus.